AI audiopack

S1-CX6.2: - 1″ ASV voice coil. - 20mm Silk dome neodymium tweeter. - 2-way passive crossover with rubber housing. - Impedance 4 Ohm - Tweeter crossover 12dB / oct - Midbass crossover 6dB / oct - Crossover cutoff 4900Hz - Power recommendation 25-130W - Sensitivity 89dB - Woofer outer diameter 165mm - Woofer mounting diameter 142,7mm - Woofer mounting depth with rubber 63mm - Tweeter outer diameter 36mm - Tweeter mounting 33mm - Tweeter mounting depth 8,7mm. GZIB 20BR: Model Subwoofer Box Diameter 20 cm / 8″ Power Handling (RMS) 150 Watts Impedance 4 Ohms Net Volume 17 L / 0.60 cu.ft. Subwoofer GZIW 20 Dimensions (B x H x T1/T2) 400 x 270 x 290/230 mm / 15.75″ x 10.63″ x 11.42″/9.06″. S2-A60.4: RMS POWER (2ohm ) 12v 1%THD 4x105 W RMS POWER (4ohm ) 12v 1%THD 4x70 W BRIDGED POWER(4ohm) 12v 1%THD 2x210W T.H.D 0,02% 4ohm, 0.04 % 2ohm BANDWIDTH: 10Hz-40KHz S/N RATIO (A-WEIGHTED): 105dB CHANNEL SEPARATION: 45dB INPUT SENSITIVITY: 0.5-6V INPUT IMPEDANCE: 13K LOW PASS: x1: 50Hz-500Hz x10: 500Hz-5KHz HIGH PASS: x1: 12Hz-250Hz (FRONT) x2Q: 250Hz-5KHz(FRONT) x1 : 50Hz-500Hz(REAR) x10: 500Hz-5KHz(REAR) BAND PASS(FRONT ): 12Hz- 5KHz CROSSOVER SLOPE: 12dB/oct BASS BOOST: 0/6dB(@45Hz) MODE: 2CH/4CH POWER FUSE: 2x25A HIGH-LEVEL VOLTAGE: 0.75-9V Cable fitting size: +12V = 20mm2 GND = 20mm2 REM = 6mm2 SPEAKER = 6mm2 Current Draw (Max): 48A DIMENSIONS: W: 183mm / (7.2 IN) H: 60mm / (2.4I N) L: 304mm / ( 12.0 IN)