Helix IK W8 - DVC2 2x2Ohm
Technical data IK W8 DVC2 – 2 x 2 Ohms Power handling RMS / max. P 300 / 600 Watts Impedance Z 2 x 2 – DC resistance Re 2 x 1.6 – Resonance frequency Fs 37 Hz Mechanical Q factor Qms 3.56 Electrical Q factor Qes 0.46 Total Q factor Qts 0.41 Compliance Cms 262 ?m/N Equivalent air volume Vas 17 L Force factor B*I 10.7 Tm Sensitivity SPL 89.0 dB @ 2.83V / 1m 86.0 dB @ 1W / 1m Cone area Sd 219 cm² Moving mass Mms 69 g Cone material Hand - scooped paper cone Mechanical resistance Rms 4.54 kg/s Voice coil diameter ø 50.8 mm Voice coil winding height 24 mm Max. linear excursion Xmax +/ - 8.0 mm Outer diameter ø 213.5 mm / 8.40? Installation diameter ø 182 mm / 7.17? Installation depth 101 mm / 3.98? Recommended enclosure volumes Sealed box Net volume 8 L Lower limiting frequency ( - 3dB) 50 Hz Recommended DSP settings Recommended ?self - define? highpass filter with 50 Hz cut - off frequency and Q = 1.5, additional EQ filter 115 Hz / Q = 1.0 / - 2.5 dB Vented box Net volume 8 L Port diameter ø 60 mm / 2.36? Port area 28 cm² Port length 42 cm / 16.5? (angled port) Port tuning frequency Fb 43 Hz Lower limiting frequency ( - 3dB) 45 Hz Recommended DSP settings Recommended ?self - define? highpass filter with 43 Hz cut - off frequency and Q = 1.5, additional EQ filter 120 Hz / Q = 0.8 / - 3.5 dB Scope of delivery 1 x Subwoofer HELIX IK W8 - DVC2 1 x Grille 1 x Gasket 1 x Data sheet
Svenska
Suomi
