HELIX AMPLIFY 201 X-OVER

Technical data Power RMS ≤ 1% THD+N @ 14.4 V - @ 4 Ohms 1 x 250 Watts - @ 2 Ohms 1 x 450 Watts - @ 1 Ohm 1 x 750 Watts* - bridged @ 4 Ohms - - bridged @ 2 Ohms - Max. output power Up to 850 Watts RMS @ 1 Ohm Amplifier technology Class D Inputs 1 x RCA / Cinch 2 x Highlevel speaker input 1 x Remote In 1 x Remote control input Input sensitivity RCA / Cinch: 0.5 - 6 Volts Highlevel: 3 - 32 Volts Input impedance RCA / Cinch: 8 kOhms Highlevel: 9 - 33 Ohms Outputs 1 x Speaker output Output voltage RCA / Cinch - Signal converter for digital input - Frequency response 10 Hz - 250 Hz Bass boost - Highpass - Lowpass 50 Hz - 250 Hz adjustable Bandpass - Subsonic 10 Hz - 50 Hz adjustable Phase 0° - 180° adjustable Slope high- / lowpass Lowpass: 12 dB/Oct. Slope subsonic 12 dB/Oct. Slope subsonic / lowpass - Signal-to-noise ratio (A-weighted) 114 dB @ full power Distortion (THD @ 1 kHz, 1 W into 4 Ohms) - Distortion (THD+N @ 1 kHz, 1 W into 4 Ohms) - Distortion (THD @ 100 Hz, 1 W into 4 Ohms) 0.003% Distortion (THD+N @ 100 Hz, 1 W into 4 Ohms) 0.02 % Damping factor 200 Operating voltage 10.5 - 16 Volts (max. 5 sec. down to 6 Volts) Idle current 1,100 mA Fuse 2 x 30 A LP-Mini-fuse (APS) Power rating DC 12 V ⎓ 80 A max. Operating temperature range -40 °C to +70 °C Additional features Active, adjustable crossover, Start-Stop capability, highlevel input with automatic turn-on function, ADEP.3 Dimensions (H x W x D) 40 x 248 x 114 mm / 1.58 x 9.76 x 4.49” Scope of delivery 1 x Amplifier HELIX AMPLIFY 204 X-OVER 1 x Cable remote control 2 x Allen key 1 x Connection cable 2 x Fuse 1 x Mounting material 1 x Instruction manual