Audiotec Fischer AMI Tuning kit

Audiotec Fischer AMI Tuning kit

Inputs: 1 x Microphone input 1 x Line input Microphone input specification Frequency response: 12 Hz - 44 kHz (+/ - 1 dB) Dynamic range: 95 dB (A - weighted) Input sensitivity: 5 - 200 mV Phantom power: Yes (24 Volts) Line input specification Frequency response: 8 Hz - 44 kHz (+/ - 1 dB) Dynamic range: 101 dB (A - weighted) Input sensitivity: max. 1 V / max. 40 V Input impedance: 10 kOhms Outputs: 2 x Line output 1 x Optical output (SPDIF) Line output specification Frequency response: 7 Hz - 44 kHz (+/ - 1 dB) Dynamic range: 100 dB (A - weighted) Maximum output voltage: 900 mV (RMS) Minimum load: 5 kOhms Loopback function: Yes General specification Audio sampling rate: 96 kHz / 32 Bit USB power consumption: max. 250 mA Supported operating systems: Windows, macOS, iOS and Android Microphone Transducer principle: Condenser (back - electret) Operating principle: Pressure receiver Frequency response: 20 – 20,000 Hz (50 – 16,000 Hz ± 1.5 dB), diffuse - field equalized Polar pattern: Omnidirectional Sensitivity (0 dB = 1 V/Pa) 15 mV/Pa (= - 36.5 dBV) ± 1 dB Nominal impedance: 160 – Nominal load impedance: – 2.2 k? Maximum SPL (Sound Pressure Level) 122 dBSPL at f = 1 kHz, k = 1%, RL = 2.2 k? Signal - to - noise ratio (related to 1 Pa) 57 dB A - weighted equivalent noise level: Approx. 26 dB(A) Power supply: 12 – 48 V phantom power Current consumption: Approx. 1.9 mA Output: Electronically balanced Compatibility: DSP PC - Tool 6 DSP PC - Tool 5 DSP PC - Tool 4 Scope of delivery: 1 x AMI (Audio Measurement Interface) 1 x Beyerdynamic MM1 Microphone 1 x Microphone holder for tripod 1 x RCA - to - Highlevel adaptor 1 x 16 GB USB 3.0 flash drive with DSP tuning tracks 1 x 3.0 m / 9.85? USB - C to USB - C cable with USB - A adaptor 1 x 3.5 m / 11.50? optical toslink cable 1 x 3.5 m / 11.50? mono RCA cable 1 x 2.0 m / 6.56? XLR microphone cable