MATCH UP 4DSP

Output power RMS - @ 4 Ohms Channels A - B: 2 x 60 Watts (min. 3 Ohms) - @ 2 Ohms - - @ 1 Ohm - - bridged @ 4 Ohms - - bridged @ 2 Ohms - - Subwoofer output @ 4 Ohms Kanal C - D: 2 x 85 Watts - Subwoofer output @ 2 Ohms Kanal C - D: 2 x 140 Watts Amplifier technology Class GD Inputs 4 x Highlevel speaker input 1 x Optical SPDIF (12 - 96 kHz) Input sensitivity 2.8 - 11 Volts Input impedance RCA / Cinch - Input impedance highlevel 9 - 33 Ohms with ADEP.3 Outputs 4 x Speaker output 1 x RCA / Cinch 1 x Remote Out Output voltage RCA / Cinch 3 Volts RMS Frequency response 15 Hz - 22,000 Hz DSP resolution 64 Bit DSP power 295 MHz (1.2 billion MAC operations/second) Sampling rate 48 kHz DSP type Audio signal processor Signal converters A/D: BurrBrown D/A: BurrBrown Signal-to-noise ratio digital input 102 dB (A-weighted) Signal-to-noise ratio analog input 101 dB (A-weighted) Distortion (THD @ 1 kHz, 1 W into 4 Ohms) 0.03 % Distortion (THD+N @ 1 kHz, 1 W into 4 Ohms) 0.03 % Damping factor 50 Operating voltage 10.5 - 18 Volts (max. 5 sec. down to 6 Volts) Power rating DC 12 V ⎓ 35 A max. Idle current 260 mA Max. remote output current 500 mA Operating temperature range -40° C to +70° C Fuse 1 x 30 A LP-Mini-fuse (APS) Additional features Class GD technology with dynamically controlled power supply, 32 Bit CoProcessor, ADEP.3 circuit, Start-Stop capability, Smart Control Port, USB-C, Auto Remote switch, Line Out Dimensions (H x W x D) 46 x 130 x 110 mm / 1.81 x 5.12 x 4.33″ Scope of delivery 1 x MATCH UPGRADE amplifier UP 4DSP 2 x Connection cable 1 x Mounting plates & material 1 x USB cable 1 x Instruction manual