BRAX MATRIX ML80 PRO

Technical data Power handling RMS / max. P 100 / 150 Watts (highpass 300 Hz at 24 dB/Oct.) Impedance Z 4 Ω DC resistance Re 3.4 Ω Frequency response 250 Hz - 6,000 Hz Resonance frequency Fs 114 Hz Mechanical Q factor Qms 1.71 Electrical Q factor Qes 0.46 Total Q factor Qts 0.36 Compliance Cms 640 μm/N Equivalent air volume Vas 1.15 L Force factor B*I 4.0 Tm Sensitivity SPL 91 dB @ 2.83V / 1m 88 dB @ 1W / 1m Cone area Sd 35 cm² Moving mass Mms 3.0g Cone material Carbon fleece multilayer cone Mechanical resistance Rms 1.26 kg/s Voice coil diameter ø 25 mm / 0.75″ Voice coil winding height 6 mm / 0.24″ Max. linear excursion Xlin +/- 1.5 mm Max. mechanical excursion Xmax +/- 4.0 mm Outer diameter ø 92 mm / 3.6″ Installation diameter ø 76 mm / 3.0″ Installation depth 34 mm / 1.4″ Recommended installation options a. Infinite baffle Recommended highpass filter 300 Hz / 24 dB/Octave “Linkwitz-Riley” b. Sealed box Net volumes Recommended DSP / amplifier highpass filter 0.4 liter (System resonance: 200 Hz) 350 Hz / 24 dB/Octave “Linkwitz-Riley” 0.8 liter (System resonance: 155 Hz) 300 Hz / 24 dB/Octave “Linkwitz-Riley” 1.2 liter (System resonance: 140 Hz) 250 Hz / 24 dB/Octave “Linkwitz-Riley” Note: The enclosure should always be filled with appropriate damping material. Scope of delivery 2 x High-End Midrange Speaker BRAX MATRIX ML80 PRO 1 x Allen key 1 x Certificate 1 x Data sheet