HELIX AMPLIFY 206 DSP

Technical data Power RMS ≤ 1% THD+N @ 14.4 V - @ 4 Ohms 6 x 100 Watts - @ 2 Ohms 6 x 190 Watts - @ 1 Ohm - - bridged @ 4 Ohms 3 x 380 Watts - bridged @ 2 Ohms - Max. output power per channel* Up to 240 Watts RMS @ 2 Ohms Up to 480 Watts RMS @ 4 Ohms bridged Amplifier technology Class D Inputs 6 x RCA / Cinch or 6 x Highlevel speaker input 1 x Optical SPDIF (12 - 96 kHz) 2 x Remote In Input sensitivity RCA / Cinch:1 - 8 Volts Highlevel: 2 - 16 Volts Input impedance RCA / Cinch 4,8 kOhms Highlevel 9 - 33 Ohms or 20 kOhms with ADEP.3 Outputs 6 x Speaker output 2 x RCA / Cinch 1 x Remote Out Output voltage RCA / Cinch 8 Volts Frequency response 20 Hz - 22,000 Hz DSP resolution 64 Bit DSP power 1 x 295 MHz (1.2 billion MAC operations/second) Sampling rate 48 kHz DSP type 1 x Audio signal processor Signal converters A/D: BurrBrown 24 Bit D/A: AKM 24 Bit Signal-to-noise ratio (A-weighted) Analog input: 99 dB @ full power Digital input: 102 dB @ full power Distortion (THD @ 1 kHz, 1 W into 4 Ohms) 0.005 % Distortion (THD+N @ 1 kHz, 1 W into 4 Ohms) 0.02 % Distortion (THD @ 100 Hz, 1 W into 4 Ohms) - Distortion (THD+N @ 100 Hz, 1 W into 4 Ohms) - Damping factor 70 Operating voltage 10.5 - 16 Volts (max. 5 sec. down to 6 Volts) Power rating DC 12 V ⎓ 93 A max. Idle current 1,100 mA Max. remote output current 500 mA Operating temperature range -40 °C to +70 °C Fuse 3 x 25 A LP-Mini-fuse (APS) Additional features ADEP.3 circuit, Smart Control Port, Auto Remote switch, 32 Bit CoProcessor Dimensions (H x W x D) 40 x 263 x 114 mm / 1.58 x 10.35 x 4.49” * One channel driven (≤ 10 % THD+N @ 14.4 V) Scope of delivery 1 x Amplifier HELIX AMPLIFY 206 DSP 2 x Allen key 1 x Mounting material 5 x Connection cable 1 x USB cable 3 x Fuse 1 x Instruction manual